Ordinary Commercial plywood
DATA |
SPCIAFICATON |
(1)Size |
1220 x 2440mm or as requested |
(2)Thickness |
3.6mm-21mm |
(3)Core |
okoume、poplar, meranti, bintangor, birch, combined or as requested |
|
poplar, birch, okoume, meranti, bintangor or requested by clients
|
|
|
|
B/BB, BB/BB, BB/CC,CC/DD or requested by clients
|
|
furniture, furniture decorations, packing，etc
|
NOTES: THE ABOVE DATA IS ONLY FOR YOUR REFERENCE AND THIS WOULD NOT OFFER YOU ANY GUARANTTEE BECAUSE THE ACTUAL REPETEATION TIMES OF THE PANELS ALSO IS INFLUENCED BY OTHER FACTORS SUCHAS DIFFERENT USING METHODS AND STRORAGE ETC..
SPECIFICATION:
THICKNESS(MM) |
LAYERS |
STANDARD SIZE |
LARGER SIZE |
|
|
MIN.(MM) |
MAX.(MM) |
MIN.(MM) |
MAX.(MM) |
4 |
3-5 |
3.6 |
4.2 |
-- |
-- |
6.5 |
5 |
5.8 |
6.7 |
-- |
-- |
9 |
7 |
8.5 |
9.5 |
8.2 |
9.5 |
12 |
7 |
11.5 |
12.5 |
11.2 |
12.5 |
15 |
9 |
14.5 |
15.5 |
14.2 |
15.5 |
18 |
11 |
17.5 |
18.5 |
17.2 |
18.5 |
21 |
13 |
20.2 |
21.5 |
20.2 |
21.5 |
MOISTURE (8-12%) & DENSITY
PRODUCTS |
WEIGHT(KG/M3) |
BIRCH |
ABOUT 690 |
COMBINED |
ABOUT 600 |
POPLAR |
ABOUT 500 |
CONSERVE AND MAINTAIN:
HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOOD
STORAGE
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.
SEALING OF EDGES
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
SEALING OF HOLES
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
CLEANING AND REPAIR
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete |
